2017 Acura RDX
CRM Mitchell1 2021-08-27T22:03:12+00:00
Mileage
51,855
Service Date
8/26/2021
Services Performed
- VALVE CLEARANCE – ADJUST – [Adjust only if noisy.] BRAKE HOSES & LINES – INSPECT – [Check the master cylinder and VSA modulator-control unit for damage and leakage.] DRIVESHAFT/PROPELLER SHAFT DUST BOOTS – INSPECT – [Check boots for cracks and boot bands for tightness.] ENGINE COOLANT – INSPECT – [Check the coolant level in the coolant reservoir. Make sure it is between the MAX mark and the MIN mark. If the coolant level in the coolant reservoir is at or below the MIN mark, add coolant to bring it up to the MAX mark, then inspect the cooling system for leaks.] EXHAUST SYSTEM – INSPECT – [Check catalytic converter heat shields, exhaust pipes, and muffler for damage, leaks, and tightness. NOTE: According to state and federal regulations, failure to do this maintenance item will not void the customer's emissions warranties. However, Acura recommends that all maintenance services be done at the recommended interval, to ensure long-term reliability.] FLUID & LUBRICANT LEVELS – INSPECT FRONT & REAR BRAKES – INSPECT – [Check pads and discs for wear (thickness), damage, and cracks. Check calipers for damage, leaks, and tightness of mounting bolts.] FUEL LINES & CONNECTIONS – INSPECT – [Check for loose connections, cracks, and deterioration; retighten loose connections and replace damaged parts. NOTE: According to state and federal regulations, failure to do this maintenance item will not void the customer's emissions warranties. However, Acura recommends that all maintenance services be done at the recommended interval, to ensure long-term reliability.] PARKING BRAKE – INSPECT STEERING COMPONENTS – INSPECT – [Inspect tie-rod ends, steering gearbox, and gearbox boots. Check steering linkage. Check boots for damage and leaking grease. Check fluid lines for damage and leaks.] SUSPENSION COMPONENTS – INSPECT – [Check bolts for tightness. Check condition of ball joint boots for deterioration and damage.] ENGINE OIL – REPLACE ENGINE OIL FILTER – REPLACE MAINTENANCE MINDER LIGHT – RESET – [Reset the Maintenance Minder Light after every service is performed. If the Light is reset without performing a service, the system will not show the proper maintenance intervals. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is needed.]
HOLLI L. gave our service a 5 star review on 8/26/2021
